先进环境材料课题组

科研成果

  发表论文: 课题组共发表论文100余篇,部分如下: 

  1. Dongxu Yao, YongfengXia, Kai-huiZuo, Yu-PingZeng, DongliangJiang, Jens Günster, Jürgen G.Heinrich, Gradient porous silicon nitride prepared via vacuum foaming and freeze drying, Materials Letters, (2015)138140. 

  2. Dongxu Yao, CynthiaM.Gomes, Yu-PingZeng, DongliangJiang, Jens Günster, Jürgen G.Heinrich, Near zero shrinkage porous Al2O3 prepared via 3D-printing and reaction bonding, Materials Letters 147(2015)116118. 

  3. Hai-Long Hu, Yu-Ping Zeng, Kai-Hui Zuo, Yong-Feng Xia, Dong-Xu Yao, Jens Günster, Jürgen G. Heinrich, Sean Li, Synthesis of porous Si3N4/SiC ceramics with rapid nitridation of silicon, Journal of the European Ceramic Society 35 (2015) 3781–3787. 

  4. Ying Pan, Kai-hui Zuo, Dongxu Yao, Jinwei Yin, Yunchuan Xin, Yongfeng Xia, Hanqin Liang, Yuping Zeng, The improved mechanical properties of β-CaSiO3 bioceramics with Si3N4  addition, Journal of the mechanical behavior of biomedical materials 55(2015)120-126. 

  5. Hanqin Liang, Xiumin Yao, Hao Deng, Hui Zhang, Xuejian Liu, Zhengren Huang, High electrical resistivity of spark plasma sintered SiC ceramics with Al2O3 and Er2O3 as sintering additives, Journal of the European Ceramic Society 35 (2015) 399–403. 

  6. Hanqin Liang, Xiumin Yao, Hui Zhang, Xuejian Li, Zhengren Huang , Friction and wear behavior of pressureless liquid phase sintered SiC ceramic, Materials and Design 65 (2015) 370–376. 

  7. Tao WanDongxu Yao, Jinwei Yin, Yongfeng Xia, Kaihui Zuo, and Yuping ZengThe Microstructure and mechanical properties of porous silicon nitride ceramics prepared via novel aqueous gelcastingInt. J. Appl. Ceram. Technol., 12 [5] (2015)932–938. 

  8. 左开慧姚冬旭夏咏锋尹金伟曾宇平,应用于陶瓷材料的快速成型技术的发展,中国材料进展3412 (2015) 26-32. 

  9. L. Hou, K.H. Zuob, Q.B. Sun, Y.F. Xia, Z.M. Ren , X.G. Lu, Y.P. Zeng, X. Li, Structure evolution and magnetic property of cobalt-modified Bi0.9Gd0.1FeO3 nanocrystal at morphotropic phase boundary, Journal of Alloys and Compounds, 650 (2015) 489-493. 

  10. Jinwei Yin,Yuping Zeng, Dongxu Yao, Yongfeng Xia, KaihuiZuo. Enhanced properties of Cu/Sn alloy-matrix composites reinforced with β-silicon nitride whiskers. J. Mater. Res. 2014, 29(6):770-777. 
  11. Jinwei Yin,Dongxu Yao, Yongfeng Xia, KaihuiZuo, Yuping Zeng. Enhanced thermal conductivity of Cu matrix composites reinforced with Ag-coated β-Si3N4 whiskers. Mater. Des. 2014, 60: 282–288 
  12. Jinwei Yin, Dongxu Yao, Hailong Hu, Yongfeng Xia, KaihuiZuo, Yuping Zeng. Improved mechanical properties of Cu matrix composites reinforced with β-Si3N4 whiskers. Mater. Sci. Eng. A. 2014, 607: 287–293. 
  13. TaoWan, DongxuYao, HailongHu, YongfengXia, KaihuiZuo, YupingZeng, Fabrication of porous Si3N4 ceramics through anovel gelcasting method, Materials Letters, 2014,133:190–192. 
  14. Kai-Hui Zuo, Li-Min Lu, Dongliang Jiang, The mechanical properties of β-Si3N4 whiskers reinforced dental resin composites, J Applied polymer science2014,13117 406921-5. 
  15. Chunjiang Zhang, Yongfeng Xia, Kaihui Zuo, Yu-Ping Zeng, The Effect of Silica Addition on the Microstructure and Properties of Polyethylene Separators Prepared by Thermally Induced Phase Separation, J Applied polymer science, 2014, 13117, 40724(1-6). 
  16. Dongxu Yao, YongfengXia, Kai-huiZuo, DongliangJiang, JensGünster,  Yu-PingZenga, JürgenG.Heinrich, The effect of fabrication parameters on the mechanical properties of sintered reaction bonded porous Si3N4 ceramics, Journal of the European Ceramic Society, 2014, 34:3461–3467. 
  17. Hai-Long Hu, Dong-XuYao, Yong-FengXia, Kai-HuiZuo, Yu-PingZeng, Fabrication and mechanical properties of SiC reinforced reaction-bonded silicon nitride based ceramics, Ceramics International, 2014,404:739–4743. 
  18. Hai-Long Hu, Yu-PingZeng, Yong-FengXia, Dong-XuYao, Kai-HuiZuo, High-strength porous Si3N4  ceramics prepared by freeze casting and silicon powder nitridation process, Materials Letters1, 2014,33:285–288. 
  19. Hai-Long Hu, Dong-Xu Yao, Yong-Feng Xia, Kai-Hui Zuo, and Yu-Ping Zeng, Porous Si3N4/SiC Ceramics Prepared via Nitridation of Si Powder with SiC Addition, Int. J. Appl. Ceram. Technol., 2014,11 [5] :845–850 (). 
  20. L. Hou, K. H. Zuo, Qingbo Sun, Z. M. Ren, Y. P. Zeng, X. Li, Effects of external magnetic field on morphology and magnetic property of BiFeO3 particles prepared by hydrothermal synthesis, Applied Physics Letters, 2013:102, 082901. 
  21. Porous Si3N4 ceramics prepared via partial nitridation and SHS, Dongxu Yao, Yongfeng Xia, Kai-hui Zuo, Dongliang Jiang, Jens Günster, Yu-Ping Zeng,Jürgen G. Heinrich, Journal of the European Ceramic Society, 2013,33:371–374. 
  22. Li-min Lu,Yu-Ping Zeng, Kai-hui Zuo,Fabrication and properties of surface-modified β-Si3N4 whiskers reinforced dental resin compositesJournal of Applied Polymer Science,2013,128:41-46. 
  23. Qingbo Sun,YupingZeng, KaihuiZuo, DongliangJian, Alkali tuning phases and morphologies of Ni2+ doped In2O3 nanocrystals, Journal of Crystal Growth 2011,324:1–6. 
  24. Qingbo Sun, Yuping Zeng, and Dongliang Jiang, Controlling magnetic properties of Fe3+ doped indium oxide nanocubes by atmospheric annealing method, J App. Phy. 2011,110:083922. 
  25. Qingbo Sun, Yuping Zeng, and Kaihui Zuo, Different magnetic properties of rhombohedral and cubic Ni2+ doped indium oxide nanomaterials, AIP Advances 1, 2011,042102.  
  26. Dongxu Yao, Yu-Ping Zeng, Kai-Hui Zuo, and Dongliang Jiang, The Effects of BN Addition on the Mechanical Properties of Porous Si3N4/BN Ceramics Prepared Via Nitridation of Silicon Powder, J. Am. Ceram. Soc., 2011, 94 [3] :666–670. 
  27. Kai-hui Zuo, Yuan zhang, Dongliang Jiang and Yu-Ping Zeng, Gradient porous hydroxyapatite ceramics fabricated by freeze casting method, Materials Science and Engineering, 2011,18:182011. 
  28.  Yongfeng Xia, Yu-Ping Zeng, Dongliang Jiang, Mechanical and dielectric properties of porous Si3N4 ceramics using PMMA as pore former, Ceramics International,2011, 37: 3775–3779. 
  29. Qingbo Sun, Yuping Zeng, and Kaihui Zuo, Ni2+ Doped Indium Oxide Nanocubes: Doped Contents Inducing Transferring of Their Intrinsic Magnetisms, Journal of Nanoscience and Nanotechnology, 2011,11:1–4. 
  30. Kai Hui Zuo, Yuan Zhang, Yu-Ping Zeng, Dongliang Jiang, Pore-forming agent induced microstructure evolution of freeze casted hydroxyapatite, Ceramics International, 2011,37:407–410. 
  31. Dongxu Yao, Yongfeng Xia, Yu-Ping Zeng, Kai-hui Zuo, Dongliang Jiang, Porous Si3N4 ceramics prepared via slip casting of Si and reaction bonded silicon nitride, Ceramics International,2011, 37 :3071–3076. 
  32. 姚冬旭, 曾宇平, 反应烧结法制备高强度多孔氮化硅陶瓷, , 2011, 26(4)1-5. 
  33. Kai Hui Zuo, Yu-Ping Zeng, Dong Liang Jiang ,Effect of Polyvinyl Alcohol Additive on the Pore Structure and Morphology of the Freeze-cast Hydroxyapatite Ceramics, Materials Science and Engineering C, 2010,30:283-287. 
  34. Kai Hui Zuo, Yu-Ping Zeng, Dong Liang Jiang, Effect of cooling rate and polyvinyl alcohol on the morphology of porous HAP ceramics , Materials and Design, 2010,31:3090-3094. 
  35. Li Jing, Kaihui zuo, Zhang Fuqiang, Xu Chun, Fu Yuanfei, Dongliang Jiang, Yu-Ping Zeng, The controllable microstructure of porous Al2O3 ceramics prepared via a novel freeze casting route,  Ceramics International, 2010,36:2499-2503. 
  36. Jing Li, Kaihui Zuo, Wenjuan Liu, Yu-Ping Zeng, Fu-Qiang Zhang, Dongliang JiangPorous Al2O3 Prepared via Freeze Casting and Its BiocompatibilityCeramic Materials and Components for Energy and Environmental Applications, 2010, 537–543. 
  37. Linlin Ren, Yu-Ping Zeng, Dongliang Jiang, The improved photocatalytic properties of P-type NiO loaded porous TiO2 sheets prepared via freeze tape-casting, Solid State Sciences, 2010.12(1):138-143. 
  38. Yongfeng Xia, Yu-Ping Zeng, Dongliang Jiang, Dielectric and mechanical properties of porous Si3N4 ceramics prepared via low temperature sintering, Ceramics International ,2009,35:1699–1703.  
  39. Shifeng Liu, Yu-ping Zeng, Dongliang Jiang, Effects of CeO2 addition on the properties of cordierite-bonded porous SiC ceramics, Journal of the European Ceramic Society, 2009,29 :1795–1802. 
  40. Yuan Zhang, Kaihui Zuo, Yu-Ping Zeng, Effects of gelatin addition on the microstructure of freeze-cast porous hydroxyapatite ceramics, Ceramics International, 2009,35 :2151–2154. 
  41. Linlin Ren, Yu-Ping Zeng, Dongliang Jiang , Preparation of porous TiO2 by a novel freeze casting, Ceramics International 2009,35:1267–1270. 
  42. Linlin Ren , Yu-Ping Zeng, Dongliang Jiang, Preparation, characterization and photocatalytic activities of Ag-deposited porous TiO2 sheets, Catalysis Communications 10 (2009) 645649. 
  43. Dewei Chu, Yu-Ping Zeng, Dongliang Jiang, and Yoshitake Masuda,  Room Temperature Ferromagnetism in Transition Metal Doped TiO2 Nanowires, Science of advanced Materials Vol. 1, 13, 2009,1-3. 
  44. Shifeng Liu,Yu-Ping Zeng, Dongliang Jiang. Effects of CeO2 addition on the properties of cordierite-bonded porous SiC ceramics. J. Eur. Ceram. Soc., 2009, 29: 1975-1802. 
  45. Shifeng Liu,Yu-ping Zeng, Dongliang Jiang. Fabrication and characterization of cordierite-bonded porous SiC ceramics. Ceram. Int., 2009, 35 (2): 597-602. 
  46. Yu-Ping Zeng, Andre Zimmermann, Fritz Aldinger, Dongliang Jiang,Effect of organic additives on the zeta potential of PLZST and rheological properties of PLZST slurries, J.Eur.Ceram. Soc., 28 (2008) 2597–2604. 
  47. Kai Hui Zuo, Yu-Ping Zeng, Dongliang Jiang, Properties of microstructure-controllable porous yttria-stabilized ziroconia ceramics fabricated by freeze casting,Int. J. Appl. Ceram. Technol., 2008, 5,2 , 198. 
  48. DeWei Chu, Yu-Ping Zeng, Dongliang Jiang, Abnormal phase transition and magnetic properties in Cu, Fe co-doped In2O3 nanocrystals, Appl. Phys. Lett., 2008,92,182507. 
  49. Dewei Chu,Yu-Ping Zeng, Dongliang Jiang, Zhongming Ren,Weili Ren,Junhu Wang,Tao Zhang, Structural, optical, and magnetic properties of Fe-doped In2O3 nanocubes,J. Mater. Res., 2008,23. 
  50. Linlin Ren, Yu-Ping Zeng, Dongliang Jiang, Preparation of Porous TiO2 Sheets by Aqueous TapeCasting and their Photocatalytic Activation,Int. J. Appl. Ceram. Technol., 2008,5,505-512. 
  51. S.Q.Ding, Y.P.Zeng and D.L.Jiang, Fabrication of Mullite Ceramics With Ultrahigh Porosity by Gel Freeze Drying, J.Am.Ceram.Soc.,2007,90(7):2276-2279. 
  52. S.Q.Ding, S.M.Zhu, Y.P.Zeng and D.L.Jiang, Fabrication of mullite-bonded porous silicon carbibde ceramics by in situ reaction bonding,Journal of European Ceramic Society,2007,27:2095-2102. 
  53. S.Q.Ding, Y.P.Zeng and D.L.Jiang, Oxidation bonding of porous silicon nitride ceramics with high strength and low dielectric constant, Materials Letters,2007,61(11-12):2277-2280. 
  54. S.Q.Ding, Y.P.Zeng and D.L.Jiang, Thermal shock behaviour of mullite-bonded porous silicon carbide ceramics with yttria addition,J.Phys.D:Appl.Phys.,2007,40:2138-2142. 
  55. K.H.Zuo, D.L..Jiang, J.X.Zhang and Q.L.Lin,Forming nanometer TiO2 sheets by nonaqueous tape casting,Ceramics International,2007,33:477-481. 
  56. K.H.Zuo, D.L..Jiang, Q.L.Lin and Y.P.Zeng,Improving the mechanical properties of Al2O3/Ni laminated composites by adding Ni particles in Al2O3 layers, Materials Science and Engineering A,2007, 443:296-300. 
  57. D.W.Chu, Y.P.Zeng, D.L.Jiang and Z.M.Ren,Tuning the crystal structure and magnetic properties of Fe doped In2O3 nanocrystals, Appl.Phys.Lett.,2007,91:262503. 
  58. D.W.Chu, Y.P.Zeng and D.L.Jiang, Controlled growth and properties of Pb2+ doped ZnO nanodisks, Materials Research Bulletin,2007,42:814-819. 
  59. D.W.Chu,Y.P.Zeng and D.L.Jiang, Solution-Based,High-Yield Synthesis of Cobalt-Doped Zinc Oxide Nanorods, J.Am.Ceram.Soc.,2007,90(7):2269-2272. 
  60. D.W.Chu, Y.P.Zeng and D.L.Jiang, Synthesis of Room-Temperature Ferromagnetic Co-Doped ZnO Nanocrystals under a High Magnetic Field,J.Phys.Chem.C,2007,111(16):5893-5897. 
  61. L.L.Ren,Y.P.Zeng and D.L.Jiang, Fabrication of Gradient Pore TiO2 Sheets by a Novel Freeze-Tape-Casting Process, J.Am.Ceram.Soc.,2007, 90(9):3001-3004. 
  62. 丁书强,曾宇平,江东亮,原位反应结合碳化硅多孔陶瓷的制备与性能,无机材料学报200621(6): 1397-1403. 
  63. S.Q.Ding, S.M.Zhu, Y.P.Zeng and D.L.Jiang, Effect of Y2O3 addition on the properties of reaction-bonded porous SiC ceramics,Ceram. Int.,2006,32(4):461-466. 
  64. S.Q.Ding, Y.P.Zeng and D.L.Jiang, Thermal shock resistance of in-situ reaction bonded porous silicon carbide ceramics, Mater. Sci. & Eng. A,2006,45(1-2):326-329. 
  65. K.H.Zuo, D.L.Jiang and Q.L..Lin, Mechanical properties of Al2O3/Ni laminated composites,Mater. Lett., 2006,60(9): 1265-1268. 
  66. K.H.Zuo, D.L.Jiang and Q.L..Lin, Fabrication and interfacial structure of Al2O3/Ni Laminar Ceramics, Ceram. Int.,2006, 32(6):613-616. 
  67. D.W.Chu, Y.P.Zeng and D.L.Jiang, Hydrothermal synthesis and optical properties of Pb2+ doped ZnO nanorods, Mater. Lett., 2006,2(60):2783-2785. 

  授权专利:课题组授权专利5项,申请专利100项。部分授权专利如下: 

  1. 200610119233.9,凝胶包裹-冷冻干燥工艺制备碳化硅多孔陶瓷的方法,曾宇平、丁书强、江东亮、左开慧、褚德伟、任琳琳。 
  2. 200610119248.5 溶胶凝胶-冷冻干燥工艺制备氧化铝多孔陶瓷的方法,曾宇平、丁书强、江东亮 
  3. 200710037605.8,凝胶冷冻干燥法制备莫来石多孔陶瓷的方法,曾宇平、丁书强、江东亮 
  4. 200710044189.4,晶型可控的氧化铟粉末的制备方法,褚德伟、曾宇平、江东亮 
  5. 201110247169.3,一种制备多孔氮化硅陶瓷材料的方法,曾宇平、姚冬旭
  6. 一种新型凝胶浇注结合固相烧结制备碳化硅陶瓷的方法

  7. 一种耐高温多孔夹层氮化硅透波材料的制备方法

  8. 一种以六方氮化硼为烧结助剂硅酸钙生物陶瓷的制备方法

  9. 一种注浆成型结合真空发泡工艺制备梯度多孔陶瓷的方法

  10. 一种新型叠层多孔陶瓷的制备工艺

  11. 一种以二氧化硅溶胶为烧结助剂硅酸钙生物陶瓷的制备方法

  承担的项目:课题组承担基金项目20项,部分如下: 

  1. 国家自然基金重点项目(强磁场下过渡金属掺杂In2O3稀磁半导体纳米材料的研究) 
  2. 国家自然基金项目(强磁场下磁性羟基磷灰石纳米粉体合成及其性能的基础研究) 
  3. 国家自然基金项目(氮化硅陶瓷高温强度及断裂行为研究) 
  4. 预研项目(仿生技术制备宽频透波材料研究) 
  5. 配套项目(高耐磨陶瓷/青铜基复合材料研制 
  6. 上海浦江人才计划(宽频高透波多孔氮化硅材料的设计、制备和性能) 
  7. 上海市科委基础重点(高热导Si3N4陶瓷基片的制备及性能研究) 
  8. 中科院科研装备研制项目(高性能陶瓷冷冻成型及冻干设备的研制) 
  9. 硅酸盐研究所创新项目(热诱导相分离-冷冻干燥技术制备多孔SiC陶瓷)