上海硅酸盐所  |  中国科学院  
首 页
 
当前位置:首页> 学术交流
Computer simulation for the synthesis of nano particles using FSP and process control for thermal spray
发布时间:2023-12-21

  SEMINAR
The State Key Lab of
High Performance Ceramics and Superfine Microstructure
Shanghai Institute of Ceramics, Chinese Academy of Sciences

  中 国 科 学 院 上 海 硅 酸 盐 研 究 所 高 性 能 陶 瓷 和 超 微 结 构 国 家 重 点 实 验 室

  Computer simulation for the synthesis of nano particles using FSP and process control for thermal spray

  Prof. Tao Zhang

  School of Mechanical and Automotive Engineering, Kingston University

  时间:2016年8月22日(星期一)下午2: 00

  地点: 2号楼607会议室(国家重点实验室)

  欢迎广大科研人员和研究生参与讨论!

  联系人:陈立东(4804)

  Abstract

  This seminar will give a broad introduction on recent research work carried out in the Materials Research Centre, Kingston University on surface engineering, nano particle synthesis and their applications. The focus is on using computer simulation to predicate the formation of particles and the interaction between heat sources and particles. The computer simulation is used for process control and processing parameters optimization. It covers topics:

  1) Process control and parameters optimization for thermal spray.

  2) Synthesis of intermetallics and ceramic/metal composites using Self-Propagating High-Temperature Synthesis (SHS) process.

  3) Process optimization for the synthesis of nano particles using flame spray pyrolysis (FSP).

  4) Toughening fibre reinforced plastic composites using nano rubber.

  Brief Introduction

  Tao Zhang is Professor of Materials Engineering and Director of Materials Research Centre at Kingston University. After obtaining a PhD in 1988 from Tsinghua University in China, he moved to UK to continue his research in materials science and engineering. He worked in Brunel University, Birmingham University and London South Bank University before joining Kingston University in 2001. The research concerned near net shape forming, nanopowder synthesis, surface engineering and computer modelling. Computer simulations based on heat transfer, fluid mechanics and thermodynamics were used for the prediction of defects, mould flow, thermal stress analysis, thermal spray equipment design and process control, nano powder synthesis and processing optimization. Over the last 25 years, he has published over 100 papers in journal and conference proceedings. His research has been supported by EPSRC, EC FP6 and FP7, Carbon Trust and RAEng. Current on-going research is focused on nanomaterials for industry and energy applications and developing new processes to produce nano materials and coatings.

 
 
【打印本页】【关闭本页】
版权所有 © 中国科学院上海硅酸盐研究所  沪ICP备05005480号-1    沪公网安备 31010502006565号
地址:上海市长宁区定西路1295号 邮政编码:200050